UHU Power Glue Liquid Control+ is an ultra-strong instant super glue, which glues/repairs all materials in record time. Equipped with Direct-Stop technology: does not drip, with a retroactive suction effect. Clean and easy to use. Thanks to its formula, the glue penetrates into the narrowest corners and joints.
APPLICATION
Ideal for gluing small areas (not suitable for gluing large areas). Bonds most strong and flexible substrates such as leather, a large number of plastic materials such as rigid PVC (polyvinyl chloride), ABS (acrylonitrile-butadiene-styrene), PS (polystyrene), acrylic resin (Plexiglas®), polycarbonate (Makrolon®), phenolic resins (Bakelite®), porcelain, ceramics, wood, metal, cork, fire The, textile (try beforehand) and rubber. Only partially suitable for glass (after some time the assembly becomes brittle and is therefore brittled). Not suitable for PE, PP, silicone resins (Si) and rubbers, PTFE, Styrofoam, clothing leather and fabric.
INSTRUCTIONS FOR USE
The areas to be glued must be dry and free of dust and grease.
1: Apply the glue directly to the outlet of the tube as thinly as possible.
2: Immediately press the elements against each other.
3: Glue polymerizes within 60 seconds.
Universal glue Mega strong, ideal as: wood glue, extra strong plastic glue, car plastic glue, model glue, extra strong fabric glue, metal glue, strong shoe glue, ceramic glue, stainless steel glue, leather shoe glue.
[STRONG ADHESIVE ALL SUPPORT] Universal glue, ideal for gluing small areas. Bonds most strong and flexible substrates such as leather, a large number of plastic materials such as hard PVC, ABS, PS, acrylic resin, polycarbonate, phenolic resins, porcelain, ceramic, wood, metal, cork, felt, textile (try) and rubber. Not suitable for glass
With Direct-Stop technology. Drip free, with retroactive suction effect. Clean and easy to use. Super fast and extremely strong. Dishwasher safe and water resistant
Ð ¤ [SIMPLE TO USE] Instruction manual. Using the cannula, apply the glue directly to the outlet of the tube as finely as possible on one side. Immediately press the elements against each other. Depending on the amount of glue applied to the material, the glue polymerizes within 60 seconds into a synthetic resin that assembles the two elements very firmly to each other
Ðź’ [TIPS] Dust, oil, grease, wax or any other separating agent must be completely removed from the surfaces to be assembled. Do not use at temperatures below 10 °C. The glue responds best when the humidity of the air varies between 50 and 70 percent. Too much glue significantly slows down the drying process. Not suitable for PE, PP, silicone (Si) resins and rubbers, PTFE, Styrofoam, leather and fabric garments
For your creations, UHU accompanies you in all your creative projects, DIY and DIY projects
Prix : €4.99 - €3.50
(à partir de Jun 30, 2025 10:35:51 UTC – Details)